Difference between revisions of "Tarsier: Renderer (.tre)"
(→Rec Tab) |
(→Time Tab) |
||
Line 28: | Line 28: | ||
== Time Tab == | == Time Tab == | ||
+ | Can open a model time object ( [[.tti]] ) for your vizualization. | ||
== Frus Tab == | == Frus Tab == |
Revision as of 15:42, 21 July 2009
The 'Renderer' (RenderViewForm) is the main 3D visualization tool within Tarsier. Its function is to display geospatial information from
For any given scene the Renderer must decide what should be drawn, in what order to draw things, and how things should be drawn. For example, lets say we are viewing an ocean scene from above the waters surface looking down. Our view angle includes bathymetric data stored as a raster, habitat characterization data (also in raster format), data on kelp distribution and abundance (raster again), fish locations (table data), and boundaries of Marine Protected Areas stored as vectors. Perhaps some of these things change with time (e.g. the fish locations). ..unfinished..
Contents
- 1 Renderer Tabs
- 2 General Tab
- 3 Sun Tab
- 4 Rec Tab
- 5 Time Tab
- 6 Frus Tab
- 7 Econ Tab
- 8 Tex Tab
- 9 Vec Tab
- 10 World Tab
- 11 World2 Tab
- 12 Ocean Tab
- 13 Sky Tab
- 14 Fog Tab
- 15 HPlane Tab
- 16 3DObj Tab
- 17 Graphs Tab
- 18 Ven Tab
- 19 Ven2 Tab
- 20 Raster Tab
- 21 R1, R2 Tab
- 22 Map Tab
- 23 Sym1 Tab
- 24 Sym2 Tab
- 25 Sites Tab
- 26 Sites2 Tab
- 27 Agn Tab
- 28 Net Tab
- 29 Cam1 Tab
- 30 Cam2 Tab
- 31 Cams Tab
- 32 FSim Tab
- 33 Trac Tab
- 34 Links
Renderer Tabs
The Render View Form is the GUI for the Renderer. The many options and controls for the renderer are accessed via tabs at the top of the form. These tabs allow you to input and access the data, perform operations on the data (i.e. make terrain), and change how the data is visualized.
General Tab
Increase the sharpness of your rendered image by increasing the number of accumulations. Increasing the number of accululations will increase to time for Tarsier to render an image. Use wisely.
Sun Tab
You can set the sun feature in your render to automatically adjust to your model time object. Meaning when your time is at a period of night, your render will be darker then when your time is at a period of day.
Manually adjust the position of the sun
- Elevation: colors will apear brighter when the sun is higher in the sky
- Azimuth: features in your DEM with different strikes will be highlighted as the sun is shining from different directions
Manually adjust the RGBs (primary colors... red, blue and green) of your data
- Sky: sets the color of the sky
- Ambient: visibility of the data not dependent on the sun settings
- Diffusion: this essentially adjusts the blending of colors
Rec Tab
Record flights or take a still frame picture of your render Tarsier tutorial: Simple fly-through
Time Tab
Can open a model time object ( .tti ) for your vizualization.
Frus Tab
Econ Tab
Tex Tab
Vec Tab
World Tab
World2 Tab
Ocean Tab
Sky Tab
Fog Tab
HPlane Tab
3DObj Tab
Graphs Tab
Ven Tab
This tab allows you to overlay another raster over the top of the terrain - use a raster as a veneer. The height above the terrain is defined by the value of the veneer raster inversely scaled by a "density" value (value in the "Den" box). This feature was initially added to visualize snowpack dynamics. However, it can be used for a variety of purposes, such as adding rugosity to rocky terrain.