Difference between revisions of "Adding Agents"
From CCoWS Wiki
| Line 11: | Line 11: | ||
Enter an easting and northing for agent placement (''if you don't know highlight CAM tab and use e/n coordinates from view'') | Enter an easting and northing for agent placement (''if you don't know highlight CAM tab and use e/n coordinates from view'') | ||
| + | |||
Set size of agent (''remember - consider how far away the camera is from the agent -- when in doubt set size very large so you | Set size of agent (''remember - consider how far away the camera is from the agent -- when in doubt set size very large so you | ||
can see initial placement'') | can see initial placement'') | ||
| + | |||
Make sure the Enabled and Visible boxes are checked | Make sure the Enabled and Visible boxes are checked | ||
| + | |||
Make sure transparancy is set to 1 | Make sure transparancy is set to 1 | ||
Revision as of 13:27, 27 May 2009
- Select Agency Tab (Agn) from Render window
Select view from Usee menu --> Agencies edit form window opens
Double click Agency data xx--> Agency editor window opens
Click + Add button in lower left corner
Highlight new agency that appears in window
From the type drop-down menu select agent to add
Enter an easting and northing for agent placement (if you don't know highlight CAM tab and use e/n coordinates from view)
Set size of agent (remember - consider how far away the camera is from the agent -- when in doubt set size very large so you
can see initial placement)
Make sure the Enabled and Visible boxes are checked
Make sure transparancy is set to 1
