Difference between revisions of "Adding Agents"
From CCoWS Wiki
| Line 10: | Line 10: | ||
From the ''type'' drop-down menu select agent to add | From the ''type'' drop-down menu select agent to add | ||
| − | Enter an easting and northing for agent placement (''if you don't know highlight CAM tab and use e/n coordinates from view'') | + | Enter an '''easting and northing''' for agent placement (''if you don't know highlight CAM tab and use e/n coordinates from |
| − | + | view'') | |
| − | Set size of agent (''remember - consider how far away the camera is from the agent -- when in doubt set size very large so you | + | Set '''size''' of agent (''remember - consider how far away the camera is from the agent -- when in doubt set size very |
| − | + | large so you can see initial placement'') | |
| − | + | Make sure the '''Enabled and Visible''' boxes are checked | |
| − | Make sure the Enabled and Visible boxes are checked | + | Make sure '''transparancy''' is set to '''1''' |
| − | + | ||
| − | Make sure transparancy is set to 1 | + | |
Revision as of 13:29, 27 May 2009
- Select Agency Tab (Agn) from Render window
Select view from Usee menu --> Agencies edit form window opens
Double click Agency data xx--> Agency editor window opens
Click + Add button in lower left corner
Highlight new agency that appears in window
From the type drop-down menu select agent to add
Enter an easting and northing for agent placement (if you don't know highlight CAM tab and use e/n coordinates from
view)
Set size of agent (remember - consider how far away the camera is from the agent -- when in doubt set size very
large so you can see initial placement)
Make sure the Enabled and Visible boxes are checked
Make sure transparancy is set to 1
