Difference between revisions of "California Rapid Assessment Method (CRAM)"

From CCoWS Wiki
Jump to: navigation, search
Line 87: Line 87:
 
Before conducting fieldwork, stressors should be identified using existing documentation such as aerial photography and reports.<ref name="manual"/> If aerial photography is used, the maximum spatial resolution that should be used is 3 meters.<ref name="manual"/> An example of appropriate aerial photography would be [[NAIP]].<ref name="manual"/>
 
Before conducting fieldwork, stressors should be identified using existing documentation such as aerial photography and reports.<ref name="manual"/> If aerial photography is used, the maximum spatial resolution that should be used is 3 meters.<ref name="manual"/> An example of appropriate aerial photography would be [[NAIP]].<ref name="manual"/>
  
===Step 5: Fieldwork Stressor Identification===
+
===Step 6: Fieldwork Stressor Identification===
 +
Each module has a corresponding CRAM field book.<ref name="manual"/> Each CRAM field book contains a Stressor Checklist.<ref name="manual"/> Each item on the checklist can be checked as “present” or “significant negative effect on AA”.<ref name="EpisodicRiver">CRAM Episodic River Module https://www.cramwetlands.org/sites/default/files/CRAM_Worksheets_EpisodicRiverine_v1.0.pdf</ref> The Stressor Checklist has four sections for landscape context, hydrology, physical structure, and biotic structure.<ref name="manual"/>
 +
 
 +
 
 +
The Stressor Checklist is based on four assumptions:
 +
# Stressors help explain CRAM scores<ref name="manual"/>
 +
# The wetland condition declines as the number of stressors acting on the wetland increases<ref name="manual"/>
 +
# Increasing the intensity or the proximity of the stressor results in a greater decline in condition<ref name="manual"/>
 +
# Continuous or chronic stress increases the decline in condition<ref name="manual"/>
 +
 
 +
===Step 7: Calculate CRAM Score===
 +
The final CRAM score is calculated by taking the average score from the four attributes (landscape context, hydrology, physical structure, and biotic structure.)<ref name="manual"/>
 +
 
  
  

Revision as of 21:54, 1 April 2020

A summary of one of the Technical Tools used in Environmental Science and Management within California's Central Coast Region created by ENVS 560/L Watershed Systems class at CSUMB.


Summary

California Rapid Assessment Method (CRAM) is a standardized approach to monitor and assess the ecological conditions of wetlands California's wetland resources.[1][2] CRAM is represented as a single score that reflects the wetland's condition and stressors based on metrics of landscape and buffer condition, hydrology, biotic structure, and physical structure.[1]


CRAM was developed by a committee consisting of federal, state, and local agency personnel and scientists, NGO scientists, and consultants.[3] CRAM is considered "rapid" because it can take less than three hours for only two or three practitioners to asses a representative wetland area.[3]

Why use CRAM?

CRAM has been adopted in California because it is consistent, scientifically defensible, and affordable.[4] There are several public and private fund investments aimed at the protection, restoration, and management of California wetlands, but the impact of these investments are difficult to evaluate because there are often inconsistencies in data collections and quality control.[4] With CRAM, wetland health can be compared and monitored under consistent conditions. Additionally, the results of the monitoring are hosted on the EcoAtlas website, making records of CRAM data available to analysts and decision makers.[5][3]

CRAM Procedure

There are eight steps to use CRAM.

Step 1: Assemble Background Information

Background information that is helpful for aiding CRAM assessments are: management objectives, history, known or expected stressors, and general ecological character of the wetland.[4] Useful sources of background information include: USGS topographic quadrangles, National Wetlands Inventory (NWI), State Wetlands Inventory, road maps, maps of geology/soils/vegetation/land use, aerial imagery, data from the California Natural Diversity Database (CNDDB), and reports from water districts, flood control districts, open space districts, federal, state, and local agencies such as Special districts in the Monterey Region.[4]

Step 2: Classify the Wetland

To make CRAM applicable to virtually all of California's diverse range of wetlands, modules or types were created.[4] There are six major types, four of which have sub-types.[4]

Flow chart to determine which wetland module and sub-type is appropriate for CRAM.[6]

Although wetland types can change over time, through either natural or anthropogenic causes, wetlands should be evaluated by their current type.[4] Past or future changes should not be considered when identifying the CRAM type to use.[4] If there is a change in wetland type, it will be documented in the stressor checklist portion of CRAM to identify if the wetland is being stressed by the conversion.[4]


CRAM was originally created to assess vegetated wetlands, so CRAM may not be as effective at describing wetland health if the wetland is non-vegetated.[4] Such non-vegetated wetlands would include tidal flats or mudflats.[4] If CRAM is to be used on a non-vegetated wetland, it should be noted in the Basic Information page and the Plant Community metric.[4]


Each wetland type has its own recommended Assessment Area (AA).[4] For a wetland to be considered as an assessable wetland under CRAM, there must be enough of the wetland area to include one or more AA.[4]

CRAM Wetland Types CRAM Sub-types Recommended AA Size
Riverine Confined Riverine Recommended length is 10x average bankfull channel width; maximum length is 200 m; minimum length is 100 m. AA should extend laterally (landward) from the bankfull contour to encompass all the vegetation (trees, shrubs vines, etc.) that probably provide woody debris, leaves, insects, etc. to the channel and its immediate floodplain; minimum width is 2 m.
Non-confined Riverine
Depressional Individual Vernal Pools There are no size limits.
Vernal Pool Systems Preferred size is <10 ha (about 300m x 300m; shape can vary); there is no minimum size so long as there are between 3 and 6 pools. If the system has between 3 and 6 pools, assess all of them. If there are more than 6 pools, select 6 that represent the range in size of pools present on the site.
Depressional Preferred size is 1.0 ha (a 56 m radius circle or about 100m x 100m, but shape can vary); Maximum size is 2.0 ha (an 80 m radius circle or about 140m x 140m, but shape can vary); There is no minimum size.
Playas No sub-type Preferred size is 2.0 ha (about 140m x 140m, but shape can vary); Minimum size is 0.5 ha (about 75m x 75m).
Estuarine Perennial Saline Estuarine Preferred size and shape for estuarine wetlands is a 1.0 ha circle (radius about 55m), but the shape can be non-circular if necessary to fit the wetland and to meet hydro-geomorphic and other criteria. The minimum size is 0.1 ha (about 30m x 30m).
Perennial Non-saline Estuarine
Bar-Built Estuarine Maximum size is 2.25 ha (about 150 m x 150 m, but shape can vary), The minimum size is 0.1 ha (about 30m x 30m).
Lacustrine No sub-type Preferred size is 2.0 ha (about 140m x 140m, but shape can vary); Minimum size is 0.5 ha (about 75m x 75m).
Slope Seeps and Springs Preferred size is 0.50 ha (about 75m x 75m, but shape can vary); there is no minimum size (least examples can be mapped as dots).
Forested Slope
Wet Meadows Preferred size is 1.0 ha (about 140m x 140m, but shape can vary); Maximum size is 2.0 ha; minimum size is 0.1 ha (about 30m x 30m).
[4]

Step 3: Identify Assessment Window

The Assessment Window is the window of time each year when CRAM should be conducted.[4] Generally, the CRAM Assessment Window occurs during the main growing season.[4] A typical wetland Assessment Window falls between March and September, but can vary with latitudes and altitudes.[4] Because each Assessment Window is unique to each wetland, local or regional cues may be needed to determine when the window opens and closes each year.[4]

Step 4: Estimate AA

Although an AA may include the entire wetland, in most cases the AA is only a portion of the whole wetland.[4] It is important to ensure that the AA only includes one wetland type, even if multiple wetlands are contiguous with or nested within each other.[4] The AA is estimated, then verified in the field.[4]

Step 5: Pre-Fieldwork Stressor Identification

Before conducting fieldwork, stressors should be identified using existing documentation such as aerial photography and reports.[4] If aerial photography is used, the maximum spatial resolution that should be used is 3 meters.[4] An example of appropriate aerial photography would be NAIP.[4]

Step 6: Fieldwork Stressor Identification

Each module has a corresponding CRAM field book.[4] Each CRAM field book contains a Stressor Checklist.[4] Each item on the checklist can be checked as “present” or “significant negative effect on AA”.[7] The Stressor Checklist has four sections for landscape context, hydrology, physical structure, and biotic structure.[4]


The Stressor Checklist is based on four assumptions:

  1. Stressors help explain CRAM scores[4]
  2. The wetland condition declines as the number of stressors acting on the wetland increases[4]
  3. Increasing the intensity or the proximity of the stressor results in a greater decline in condition[4]
  4. Continuous or chronic stress increases the decline in condition[4]

Step 7: Calculate CRAM Score

The final CRAM score is calculated by taking the average score from the four attributes (landscape context, hydrology, physical structure, and biotic structure.)[4]



Links

References

  1. 1.0 1.1 California Creates Rapid Assessment Method for Wetland Protection https://www.epa.gov/wetlands/california-creates-rapid-assessment-method-wetland-protection
  2. California Rapid Assessment Method Website https://www.cramwetlands.org/
  3. 3.0 3.1 3.2 About California Rapid Assessment Method https://www.cramwetlands.org/about
  4. 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 California Rapid Assessment Method for Wetlands User’s Manual Version 6.1 https://www.cramwetlands.org/sites/default/files/2013-04-22_CRAM_manual_6.1%20all.pdf
  5. About EcoAtlas https://www.ecoatlas.org/about/
  6. California Rapid Assessment Method Flowchart https://www.cramwetlands.org/sites/default/files/UPDATED%20CRAM%20Flowchart_July2016.pdf
  7. CRAM Episodic River Module https://www.cramwetlands.org/sites/default/files/CRAM_Worksheets_EpisodicRiverine_v1.0.pdf

Disclaimer

This page may contain students' work completed as part of assigned coursework. It may not be accurate. It does not necessarily reflect the opinion or policy of CSUMB, its staff, or students...