Difference between revisions of "Tarsier Tutorial: Adding GroundWater to Watershed Simulation"
From CCoWS Wiki
Line 2: | Line 2: | ||
== Prerequisits == | == Prerequisits == | ||
* Watershed analysis saved with all data | * Watershed analysis saved with all data | ||
− | * Working Watershed simulation model | + | * Working Watershed simulation model (See [[Tarsier Tutorial: Watershed simulation using the Marmoset Model]]) |
== Adding aquifer Information to your Network Data == | == Adding aquifer Information to your Network Data == | ||
* Open Aquifer Tab in Watershed Analysis tool | * Open Aquifer Tab in Watershed Analysis tool |
Revision as of 12:51, 9 April 2010
- This tutorial provides instructions on how to how a groundwater component to you Watershed Simulation Model.
Prerequisits
- Watershed analysis saved with all data
- Working Watershed simulation model (See Tarsier Tutorial: Watershed simulation using the Marmoset Model)
Adding aquifer Information to your Network Data
- Open Aquifer Tab in Watershed Analysis tool
- Click Calc Floodplain
- Warning: Must have your Net Ptr, HydroDEM, and Stream Raster open in their usee controls.
- This tool creates a raster covering your floodplain according to your set max flood height
- Default max flood height it 1 meter. This should be estimated and changed to suit your watershed.
- Click Calc Floodplain Area
- Warning: Must have your Net Ptr, HydroDEM, and Stream Raster And your floodplain raster open in their usee controls.
- This too breaks up your floodplain and connects a floodplain area with a corresponding node.
- Click Calc Aquifer From Floodplain
- Warning, must have your floodplain raster open, and have calculated floodplain area
- This tool uses a hillslope parameter to estimate triangular aquifer geometry
- The default hillslope is 15 degrees from horizontal, make a good estimation for your watershed.
- Warning, a hillslope less then or equal to zero, or greater or equal to ninety will not work properly.
Including GroundWater processes in you Watershed Model
- In Progress....