Difference between revisions of "Tarsier Tutorial: Using veneer as relief"
From CCoWS Wiki
(→Using veneer as relief) |
(→Using veneer as relief) |
||
| Line 10: | Line 10: | ||
# Make sure your Renderview window is selected(3D renderer window). | # Make sure your Renderview window is selected(3D renderer window). | ||
# Go to the '''Ven''' tab. This tab has two '''UseeControls''' like the generic one below: [[Image:UseeControl.JPG|600px|thumb|none|]] UseeControls are one of the ways Tarsier loads and shares data, you can learn more about it here: [[Tarsier: UseeControl]]. | # Go to the '''Ven''' tab. This tab has two '''UseeControls''' like the generic one below: [[Image:UseeControl.JPG|600px|thumb|none|]] UseeControls are one of the ways Tarsier loads and shares data, you can learn more about it here: [[Tarsier: UseeControl]]. | ||
| − | # | + | # Go to the '''Veneer:''' UseeControl and click the '''Open''' button. Browse to the raster that you want to use as relief(e.g LandCover4_BGST.tra raster) and click open. |
| + | # Now you need to load your color raster. | ||
| + | ## Go the right side of the '''Ven''' tab. | ||
| + | ## Go to UseeControl named '''Veneer color''' and load your color raster(e.g. your output Y1Raster.tra) by selecting it from the drop-down box. If the raster is not there you can click the '''Open''' button. | ||
== Who has taken this tutorial? == | == Who has taken this tutorial? == | ||
Revision as of 12:32, 19 November 2010
Contents
Introduction
Prerequisites
- Data:
- Two raster layers(e.g. vegetation and model output raster).
- Working Renderview window with at least one terrain and one raster color loaded.
Using veneer as relief
- Make sure your Renderview window is selected(3D renderer window).
- Go to the Ven tab. This tab has two UseeControls like the generic one below: UseeControls are one of the ways Tarsier loads and shares data, you can learn more about it here: Tarsier: UseeControl.
- Go to the Veneer: UseeControl and click the Open button. Browse to the raster that you want to use as relief(e.g LandCover4_BGST.tra raster) and click open.
- Now you need to load your color raster.
- Go the right side of the Ven tab.
- Go to UseeControl named Veneer color and load your color raster(e.g. your output Y1Raster.tra) by selecting it from the drop-down box. If the raster is not there you can click the Open button.
Who has taken this tutorial?
Please enter your user name at the bottom of this list, and the date:
