Difference between revisions of "Tarsier Tutorial: Using veneer as relief"
From CCoWS Wiki
(→Using veneer as relief) |
(→Using veneer as relief) |
||
| Line 9: | Line 9: | ||
# Make sure your Renderview window is selected(3D renderer window). | # Make sure your Renderview window is selected(3D renderer window). | ||
| − | # Go to the '''Ven''' tab. | + | # Go to the '''Ven''' tab. This tab has two '''UseeControls''' like the generic one below: [[Image:UseeControl.JPG|600px|thumb|none|]] UseeControls are one of the ways Tarsier loads and shares data, you can learn more about it here: [[Tarsier: UseeControl]]. |
| − | + | ||
# | # | ||
Revision as of 12:19, 19 November 2010
Contents
Introduction
Prerequisites
- Data:
- Two raster layers(e.g. vegetation and model output raster).
- Working Renderview window with at least one terrain and one raster color loaded.
Using veneer as relief
- Make sure your Renderview window is selected(3D renderer window).
- Go to the Ven tab. This tab has two UseeControls like the generic one below: UseeControls are one of the ways Tarsier loads and shares data, you can learn more about it here: Tarsier: UseeControl.
Who has taken this tutorial?
Please enter your user name at the bottom of this list, and the date:
