Tarsier Tutorial: Using veneer as relief
From CCoWS Wiki
Contents
Introduction
Prerequisites
- Data:
- Two raster layers(e.g. vegetation and model output raster).
- Working Renderview window with at least one terrain and one raster color loaded.
Using veneer as relief
- Make sure your Renderview window is selected(3D renderer window).
- Go to the Ven tab. This tab has two UseeControls like the generic one below: UseeControls are one of the ways Tarsier loads and shares data, you can learn more about it here: Tarsier: UseeControl.
Who has taken this tutorial?
Please enter your user name at the bottom of this list, and the date: